tutorial – ENIGMA2

DreamELite TUTORIALS

[TUTO] How to install and configure picons on DREAMELITE 7.1

December 13, 2021 admine2 Dreambox, enigma2, guide, HowTo, picons, tuto, tutorial

Here is an image tutorial that shows you how to install and configure picons on DREAMBOX receivers under DREAMELITE image.

[TUTORIAL] How to install OSCAM on VTI 15.0

February 4, 2021December 18, 2021 admine2 4k, guide, image, solo 4k, tuto, tutorial, ultimo, ultimo 4k, uno, VTI, Vu+, Vuplus, zero 4k

Here is a tutorial on the installation and configuration of OScam on the Vu+ decoder under a VTI 15.x image

OpenATV TUTORIALS

[TUTORIAL] How to install OSCAM-EMU on OpenATV 6.5

January 1, 2021November 18, 2021 admine2 Dreambox, enigma2, how to, image, Octagon, OpenATV, OpenATV 6.5, tuto, tutorial, Vu+

Here is a tutorial on the installation and configuration of OScam on the Vu+ decoder under a OpenATV 6.5 image

OpenATV TUTORIALS

[TUTORIAL] How to install OSCAM on OpenATV 6.4

January 1, 2021November 18, 2021 admine2 Dreambox, emu, enigma2, OpenATV, OpenATV 6.4, OSCAM, tuto, tutorial, Vu+

Here is a tutorial on the installation and configuration of OScam on the Vu+ decoder under a OpenATV 6.4 image

EGAMI TUTORIALS

[TUTORIAL] How to setup Wireless on EGAMI

September 14, 2020 admine2 egami, Octagon, tuto, tutorial, WIFI, wireless, ZGEMMA

Here is a tutorial how to setup wireless on decoder under a EGAMI image. For this tutorial you need. Material:

[TUTO] How to enable and configure FCC on VTI

July 1, 2020August 18, 2020 admine2 enigma2, fcc, image, tuto, tutorial, VTI, Vu+, Vuplus

Here is an image tutorial that shows you how to enable and configure FCC (FAST CHANNEL CHANGE) on Vu+ 4K

OpenPLi TUTORIALS

[TUTORIAL] How to install OSCAM on OpenPLi [OFFLINE]

June 19, 2020November 18, 2021 admine2 camd, emu, enigma2, guide, image, OpenPLi, OSCAM, softcam, tuto, tutorial, Vu+, Vuplus

Here is a tutorial on the installation and configuration of OScam on the decoder (setbox) under a OpenPLi 7.x and

[TUTO] How To flash/update Xsarius Galaxy 4K FBC

May 1, 2020 admine2 enigma2, flash, tuto, tutorial, USB

FLASHING THE RECEIVER. image https://www.enigma2.net/category/images/xsarius/galaxy-4k-fbc/ Unzip compressed file. Copy the content to a USB Pen Drive. Power off or

[TUTO] How To flash/update Xtrend ET8000

May 1, 2020May 1, 2020 admine2 enigma2, flash, image, tuto, tutorial, Xtrend

What you need before we start: 1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).

[TUTORIAL] How to install SKIN on VTI

October 19, 2019August 18, 2020 admine2 skin, skins, tuto, tutorial

Here is an image tutorial that shows you how to install SKIN on Vuplus decoders under a VTI image. For

← Previous