[TUTO] How to install and configure picons on DREAMELITE 7.1

Here is an image tutorial that shows you how to install and configure picons on DREAMBOX receivers under DREAMELITE image.

 

For this tutorial you need.

 

Winscp for WINDOWS

 

PICONS 220 × 132 for satellite

– Launch WINSCP in the home window

File protocol: FTP

Hot name: 192.168.1.100 (ip address of your zgemma)

User name: root

Password: “empty” by default the root password in dreamelite is empty (no password needed)

After clicking on Login

Unpack the Picon ASTRA 220 × 132 file

Select the picon folder and drag between the two windows to the /usr/share/enigma2 folder.

press BLUE button and select SETUP

enable show picons in channellist

select the right path

/usr/share/enigma2/picon

after press GREEN button  to save.

REBOOT you GUI or your receiver

Congratulation you have Picon now on your DREAMELITE SKIN 🙂

*******************************************************************

You can install the picons on the internal flash memory of your receiver, the internal hard disk, a USB key

Command to add when copying picon to the internal hard drive

ln -s /usr/share/enigma2/picon /hdd/picon

Command to add when copying picon to USB stick

ln -s /usr/share/enigma2/picon/usb/picon