[TUTO] How To flash/update Gigablue UHD UE 4K

What you need before we start:

1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).
2) Image of your choice.
3) Compression software such as 7zip, Winrar, Winzip

PREPARATION

1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
3. Open the folder you extracted to your desktop, in this case named Image-gbue4k_usb.zip, you will see another folder named gigablue, this is your image file.Copy the entire gigablue folder directly to the USB stick.

Images for Gigablue UHD UE 4K

1) Power off the receiver

2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible.
4) Power the receiver on.
5) When instructed via the receivers display press the Power button front of the receiver or the OK button behind the front flap of the receiver to start the flashing process.
6) If successful the receiver will reboot it self after the flashing process has completed.
7) Remove USB stick that contains the images files.

-Warning-
During upgrading, please don’t unplug power or shut down STB.
Don’t power off within 5 seconds after upgrade is completed.

Leave a Reply

Your email address will not be published. Required fields are marked *