[HOW TO FLASH] how to flash Miraclebox Premium Micro

To flash the original Miraclebox Premium Micro (the V1 version), you will follow the standard procedure for the Premium line, but with a specific subfolder name that distinguishes it from the V2 or the Mini models.

1. Preparation

• USB Stick: A high-quality USB stick (8GB or smaller is highly recommended for original Micro bootloaders).

• Format: The stick must be formatted to FAT32.

• Firmware: Download the image specifically for the Premium Micro (e.g., OpenATV, OpenPLi).

2. Folder Structure

The bootloader identifies the image via the miraclebox directory and the micro subfolder.

1. Extract the firmware .zip file on your computer.

2. You will see a folder named miraclebox.

3. Copy the entire miraclebox folder to the root of your USB stick.

   • Path: USB:\miraclebox\micro\

   • Contents: Inside the micro subfolder, you should see files like kernel.bin, rootfs.bin, and imageversion.

3. The Flashing Process

1. Power Off: Unplug the power lead from the back of the receiver.

2. Insert USB: Plug the USB stick into the rear USB port.

3. Power On: Plug the power lead back in.

4. Initiate Flash:

   • Watch the front panel LED.

   • When the receiver detects the USB (the LED may change color or a message like “Found Image! Press OK to flash” will appear if you have a display), quickly press the Power/OK button on the front panel to confirm.

5. Wait: The flashing process will start. Do not interrupt the power.

6. Completion: The receiver will reboot automatically once finished.

The flashing process should take approximately two to four minutes to complete, while the receiver
is being flashed it is vitally important that you DO NOT power the receiver down for any reason as
this can cause serious and or permanent damage.