mutant – ENIGMA2

[IMAGE] OpenPLi 8.0 RC for Mutant HD60

December 13, 2020 admine2 4k, enigma2, HD, HD60, mutant, OpenPLi, UHD

[IMAGE] OpenATV 6.5 for Mutant HD51

August 19, 2020 admine2 enigma2, firmware, flash, image, Mut@nt, mutant, OpenATV, update, upgrade

[IMAGE] OpenATV 6.5 for Mutant HD60 4K

August 19, 2020 admine2 4k, enigma2, flash, HD, image, mutant, OpenATV, update, upgrade

[IMAGE] OpenVision 10.1-R166 for Mutant HD51

June 25, 2020 admine2 firmware, image, Mut@nt, mutant, OpenVision

– GCC 10.1.0 – Glibc 2.31 – GStreamer 1.17.0.1 – Python 2.7.18 – OpenSSL 1.1.1g – Busybox 1.31.1 –

[IMAGE] OpenVision 10.1-R166 for Mutant HD60

June 25, 2020 admine2 firmware, image, Mut@nt, mutant, OpenVision

– GCC 10.1.0 – Glibc 2.31 – GStreamer 1.17.0.1 – Python 2.7.18 – OpenSSL 1.1.1g – Busybox 1.31.1 –

[IMAGE] OpenVision 10.1-r152 for Mutant HD51

May 22, 2020 admine2 enigma2, firmware, image, mutant, OpenVision

– GCC 10.1.0 – Glibc 2.31 – GStreamer 1.17.0.1 – Python 2.7.18 – OpenSSL 1.1.1g – Busybox 1.31.1 –

[IMAGE] OpenVision 10.1-r152 for Mutant HD60

May 21, 2020 admine2 enigma2, image, Mut@nt, mutant, OpenVision

– GCC 10.1.0 – Glibc 2.31 – GStreamer 1.17.0.1 – Python 2.7.18 – OpenSSL 1.1.1g – Busybox 1.31.1 –

OpenVIX TUTORIALS

[TUTORIAL] How to install GCAM on OpenVIX

July 17, 2018 admine2 duo, duo 4k, EDISION, emu, enigma2, Formuler, Gcam, Gcam 1.8, gcam.conf, gcam.server, Gigablue, GOLDEN INTERSTAR, Maxdigital, Medialink, MIRACLEBOX, mutant, Octagon, ODIN-MARA, OpenVIX, OpenVIX 5.1, OPTICUM, softcam, solo, solo 2, solo 4k, solo se, SPYCAT, TECHNOMATE, TIVIAR, ultimo, ultimo 4k, uno, uno 4k, VENTON UNIBOX, Vu+, Vuplus, Xtrend, zero

Here is a tutorial on the installation and configuration of Gcam on the Vu+ decoder under a OpenVIX 5.1 image.

OpenVIX TUTORIALS

[TUTORIAL] How to install NCAM on OpenVIX

July 17, 2018April 3, 2020 admine2 duo, duo 4k, EDISION, emu, enigma2, Formuler, Gigablue, GOLDEN INTERSTAR, Maxdigital, Medialink, MIRACLEBOX, mutant, Ncam, NCAM 5.5, Octagon, ODIN-MARA, OpenVIX, OpenVIX 5.1, OPTICUM, softcam, solo, solo 2, solo 4k, solo se, SPYCAT, TECHNOMATE, TIVIAR, ultimo, ultimo 4k, uno, uno 4k, VENTON UNIBOX, Vu+, Vuplus, Xtrend, zero

Here is a tutorial on the installation and configuration of Ncam on the Vu+ decoder under a OpenVIX 5.1 image.

OpenVIX TUTORIALS

[TUTORIAL] How to install CCCAM on OpenVIX

July 17, 2018 admine2 CCcam, CCcam 2.3.0, CCcam.cfg, CCcam.prio, CCcam.providers, duo, duo 4k, EDISION, emu, enigma2, Formuler, Gigablue, GOLDEN INTERSTAR, Maxdigital, Medialink, MIRACLEBOX, mutant, Octagon, ODIN-MARA, OpenVIX, OpenVIX 5.1, OPTICUM, softcam, solo, solo 2, solo 4k, solo se, SPYCAT, TECHNOMATE, TIVIAR, ultimo, ultimo 4k, uno, uno 4k, VENTON UNIBOX, Vu+, Vuplus, Xtrend, zero

Here is a tutorial on the installation and configuration of CCcam on the Vu+ decoder under a OpenVIX 5.1 image.

← Previous