[HOW TO FLASH] how to flash ANADOL MULTIBOX SE

The Anadol Multibox 4K SE (Second Edition) is the successor to the original Multibox. Like the Twin and the AX models, it uses the Maintenance Mode (Recovery Menu) for flashing, which is much more reliable for managing its 4-slot Multiboot system.

Step 1: USB Preparation

• Format: Use a high-quality USB 2.0 or 3.0 stick formatted to FAT32.

• The File: Download the “recovery” zip file for the Multibox SE (e.g., OpenATV 7.x).

• Target Path: Copy the .zip file directly to the root directory of your USB drive. Do not unzip it.

Step 2: Accessing the Recovery Menu

1. Power Off: Turn off the receiver using the physical power switch at the back.

2. Insert USB: Plug the drive into the USB 3.0 port on the side.

3. The Trigger:

   • Press and hold the Power Button on the front panel.

   • While holding it, flip the rear power switch to ON.

   • Keep holding the front button until the “Maintenance Mode” menu appears on your TV screen.

Step 3: Flashing the Image

1. In the menu, select “Flash local image”.

2. Navigate to your USB drive and select the .zip file you copied earlier.

3. Select a Slot: You will see slots Linux 1, 2, 3, and 4.

   • Select Linux 1 for your primary image.

   • Select another slot if you want to test the image without deleting your current setup.

4. Confirm the flash and wait for the progress bar to reach 100%. Once done, select “Boot” and choose the slot you just flashed.