[HOW TO FLASH] how to flash ANADOL MULTIBOX Combo

The Anadol Multibox 4K Combo is the versatile sibling in the Anadol family, featuring a combined DVB-S2X and DVB-C/T2 tuner. Like the SE and Twin models, it uses the Maintenance Mode (Recovery Menu) for flashing, which is the most reliable way to manage its 4-slot multiboot system.

Step 1: USB Preparation

• Format: Use a high-quality USB 2.0 or 3.0 stick formatted to FAT32.

• The File: Download the “recovery” zip file for the Multibox Combo (e.g., OpenATV 7.x).

• Target Path: Copy the .zip file directly to the root of your USB drive. Do not unzip it.

Step 2: Accessing the Recovery Menu

1. Power Off: Turn off the receiver using the physical power switch at the back.

2. Insert USB: Plug the drive into the USB 3.0 port on the side.

3. The Trigger:

   • Press and hold the Power Button on the front panel.

   • While holding it, flip the rear power switch to ON.

   • Keep holding the front button until the “Maintenance Mode” menu appears on your TV screen.

Step 3: Flashing the Image

1. In the menu, select “Flash local image”.

2. Navigate to your USB drive and select the .zip file you copied earlier.

3. Select a Slot: You will see slots Linux 1, 2, 3, and 4.

   • Select Linux 1 for your main image.

   • Select another slot if you want to keep your current image safe in Slot 1.

4. Confirm the flash and wait for the progress bar to reach 100%. Once done, select “Boot” and choose the slot you just flashed.