[HOW TO FLASH] how to flash IZIBOX Elite 4K

To flash the IZIBOX Elite 4K, you will follow the procedure for this premium HiSilicon-based receiver. Like the other 4K models in the IZIBOX lineup, it supports multibooting, but the folder name is unique to this specific hardware.

1. Preparation

• USB Stick: A reliable USB 2.0 or 3.0 stick. 8GB to 32GB formatted to FAT32 is recommended.

• Firmware: Download the “recovery” or “USB” image specifically for the IZIBOX Elite 4K.

2. Folder Structure

The bootloader searches for the izibox directory with the elite4k subfolder.

1. Extract the firmware .zip file on your computer.

2. You should see a folder named izibox.

3. Copy the entire izibox folder to the root of your USB stick.

   • Path: USB:\izibox\elite4k\

   • Contents: Inside the elite4k folder, you should see files like bootargs.bin, fastboot.bin, and image.flash.

3. The Flashing Process

1. Power Off: Turn off the receiver using the power switch at the back.

2. Insert USB: Plug the USB stick into the USB 3.0 port (usually the side port).

3. Initiate Flash:

   • Press and hold the Power button on the front panel.

   • While holding it, turn the back power switch to ON.

4. Recovery Menu:

   • Release the button once the Recovery Menu appears on your TV screen.

   • Select “Flash Recovery Image” or “USB Multiboot Image Upgrade”.

5. Wait: The process will take a few minutes. Do not power off the device.

6. Completion: The receiver will reboot automatically into the new image.

Pro-Tip for enigma2.net

The Elite 4K is the high-end version of the IZIBOX range. On your site, emphasize that users must use the elite4k folder name. If they try to use files intended for the “ONE 4K” or “X4” models, the receiver will not recognize the update. Also, remind them that since this is a multiboot box, they can use the Recovery Menu to boot into different partitions if an update ever goes wrong.